 |
Currently, the maximum capacity print in memory MP258 / MP250 is already full or the actual printer MP258 / MP250 will stop working with the advent of messages on the screen Error 5B00 and on the LCD panel signals P07 code. To fix this please try friend follow the instructions below:
First Steps must download software to reset here.
Here are the steps to overcome MP258 Error 5B00 or P07:
- If MP258 Printer Error 5B00 or P07 turned on, turn off the MP258 printer by pressing its power button and wait until the MP258 printer goes out first.
- Press and hold the Stop / Reset then press and hold the Power button, so the key is still in a state of distress.
- Remove the Stop / Reset then press the Stop / Reset 2 x (do not release the button powernya).
- Then release both buttons simultaneously.
- MP258 Printer Error 5B00 or P07 will initialize a moment such as when the printer is first tested at the time of purchase. Wait until the LCD panel on the printer MP258 Error 5B00 or P07 earlier shows the number 0 (zero).
- The MP258 Printer will be detected as a new device on the computer, although had already installed the printer driver. Just ignore this condition.
- Conditions MP258 displays the number 0 (zero) on the LCD panel indicates that the MP258 in a state Service Mode and is ready to be reset using software.
- Download the program resetter MP258 / MP250 for error 5B00 or P07 (pal can be downloaded from the Internet)
- Prepare 2 papers in the MP258 / MP250 because it will be used for the reset process.
- Open the program resetter MP258 / MP250 for error 5B00 or P07
- Click "PLAY" and wait a few moments, the MP258 will print with the words "D = 000.0"
- Click "EEPROM Clear" and then click "EEPROM", MP258 / MP250 will print one sheet again. One row writing: TPage (TTL = 00000 COPY = 00000)
- Then turn off the MP258 / MP250 by pressing the power button.
Hopefully, these steps can help friends all were again in trouble as.
